Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GCM 12 JL Professional Originalbetriebsanleitung

Transport (see figure V)
Before transporting the power tool, the following steps must
be carried out:
– Guide the tool arm downward until the transport safety-
lock 20 can be pushed completely inward.
– Slide the saw-table extensions 15 completely in and lock
them in place (by pushing clamping lever 14 down).
– Adjust a 0° bevel angle and tighten clamping lever 23.
– Turn saw table 30 rightward to the stop and tighten locking
knob 9.
– Wind up the mains cable and tie it together with Velcro
strap 63.
– Remove all accessories that cannot be mounted firmly to
the power tool.
If possible, place unused saw blades in an enclosed con-
tainer for transport.
– Carry the machine by the transport handle 45 or hold it by
the recessed handles 16 on the sides of the saw table.
 The power tool should always be carried by two per-
sons in order to avoid back injuries.
 When transporting the power tool, use only the trans-
port devices and never use the protective devices.

Maintenance and Service

Maintenance and Cleaning

 Before any work on the machine itself, pull the mains
plug.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Cleaning
For safe and proper working, always keep the power tool and
its ventilation slots clean.
The retracting blade guard must always be able to move freely
and retract automatically. Therefore, always keep the area
around the retracting blade guard clean.
Remove dust and chips after each working procedure by
blowing out with compressed air or with a brush.
Clean the roller 38 regularly.
Accessories
Material clamp
Insert plates
Dust bag
Angle adapter for dust bag
Saw blades for wood and plate materials, panels and
strips/mouldings
Saw blade 305 x 30 mm, 40 teeth
Saw blades for plastic and non-ferrous metals
Saw blade 305 x 30 mm, 80 teeth
Saw blades for all types of laminate flooring
Saw blade 305 x 30 mm, 96 teeth
Bosch Power Tools

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Article number
Outside AU and NZ:
Phone: +61 3 95415555
1 609 B02 585
www.bosch.com.au
1 609 B01 453
Republic of South Africa
1 609 B01 716
Customer service
1 609 B01 613
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
2 608 640 440
Johannesburg
Tel.: (011) 4939375
2 608 640 452
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
2 608 642 137
English | 37
1 609 92A 1CJ | (10.6.15)