Silvercrest Z30412 Bedienungsanleitung Und Sicherheitshinweise Seite 14

½
½
½
½
16 GB/IE
66149_silv_Energiekosten-Messgerät_Content_GB-FI-SE-DE.indd 16 25.05.11 15:06
Never operate the energy meter
close to strong magnetic fields such
as motors, transformers or similar.
Do not place the energy meter face
down on workbenches or working
surfaces. This helps to prevent dam-
age to the operating elements and
the LC .
1
Remove the batteries from the energy
meter if you do not intend to use if
for any length of time.
The power meter shall be used only
in installation category II (CAT II)
according to IEC664, i. e. in which
transient voltages do not exceed
2500 V ~ , the mains supply for resi-
dential area generally belongs to this
category.