Extracting The Removable Plate; Commissioning - Silvercrest SSMW 750 B2 Bedienungsanleitung

Extracting the removable plate

1) Upper removable plate: Slide the locking devices
taneously tilt the removable plate forward so that you can lift it out from
underneath the lower mountings
2) Lower removable plate: Pull the locking devices
removable plate so that you can pull it out from the rear mountings

Commissioning

Carry out the following procedure with each of the 3 pairs of removable plates.
■ Smear the non-stick coating on the removable plates with oil suitable for
cooking.
WARNING! RISK OF INJURY!
► Let the appliance cool down before exchanging the removable plates!
Risk of Burns!
■ Install a pair of removable plates into the appliance.
■ Insert the plug into a mains power socket.
■ Close the appliance and lock it with the lid locking device
■ Let the appliance heat up for about 10 minutes.
NOTICE
► With the first usage a slight smell can arise (minimal smoke development is
also possible). This is normal and dissipates after a short time. Provide for
sufficient ventilation. For example, open a window.
■ Disconnect the plug and allow the appliance to cool down.
■ Clean the removable plates and the appliance as described in the chapter
"Cleaning".
The appliance is now ready for use.
■ 8 │
GB
upwards and simul-
.
forward and lift the
.
.
SSMW 750 B2