Westfalia Rohrteufel Bedienungsanleitung Seite 3

Drain Cleaning Bladder "Pipe Devil" Size 2
Intended Use
The drain cleaning bladder is designed for removing obstructions in pipes,
drains, siphons and sinks. Do not misuse the unit. The drain cleaning bladder
is for the use of pipe diameters from 101 – 152 mm.
Due to the very simple use the drain cleaning bladder is reliable effective and
environmentally friendly, without using chemicals.
Safety notes and Using
Keep the drain cleaning bladder out of reach of children. The unit is not a toy. The
drain cleaning bladder must only be used inside the pipe; otherwise the unit will
be damaged.
The drain cleaning bladder is equipped with an adaptor with ¾"
external thread. If necessary, unscrew the adaptor in order to
connect the water hose to the ¾" internal thread.
1. Connect the hose with the drain cleaning bladder and water
supply in your home.
2. Insert the drain cleaning bladder into the pipe and push it as far
as it will go until the unit touches the obstruction. Lightly turn
on the tap. Do not turn on the tap completely; the drain clean-
ing bladder might burst.
3. Wait just a few moments until the drain cleaning bladder fills
with water. The drain cleaning bladder expands with the water
pressure and seals off the pipe to the rear, whilst a forward-
pointing jet of water blasts away the obstruction. An additional
vibration effect frees deposits and dirt. If necessary, lightly
move the drain cleaning bladder forth and back.
4. On finishing the work, just turn off the tap and wait until the
water pours out of the unit. Remove the unit by pulling the hose.
Design protected by copyright
Instruction Manual
Article No. 41 18 27
© Westfalia 09/10