Installing The Flexible Suction Hose; Installing The Telescopic Tube; Installing The Floor Brush - Westfalia 20 47 35 Bedienungsanleitung

5. Reinsert the exhaust filter.
6. Push the filter grille back in until it audibly snaps in
and it is locked into position.

Installing the Flexible Suction Hose

Insert the suction hose adaptor located at the end
of the suction hose into the air intake duct (10) until
it audibly snaps in to connect the flexible suction
hose (1) to the vacuum cleaner.
To remove the suction hose, depress both buttons
simultaneously located at the side of the suction
hose adaptor and pull out the suction hose.

Installing the Telescopic Tube

Slide the handle (2) of the suction hose in the corresponding
opening of the telescopic tube (4) as far as it will go.
Press the lock button on the telescopic tube to extend the
telescopic tube.
Keep the lock button pressed in order to adjust the length of
the telescopic tube. If you release the lock button, the tele-
scopic tube locks in this position.

Installing the Floor Brush

1. Insert the floor brush (5) as far as it will go into the other opening of the
telescopic tube (4).
2. Press the foot pedal in direction A to clean hard
floor. In order to vacuum clean carpets, press the
foot pedal in direction B.
Assembling and Operation
11
B
A