Mounting - Westfalia SP101 Bedienungsanleitung

Mounting

1. Mark both mounting holes
and drill the holes. Mount
the rear cover of the motion
detector on the wall or on
the ceiling.
2. Hook the motion detector
into the rear cover and
tighten it with both mounting
screws (4).
3. With the
head (1) you can vertically adjust the angle up to 180°.
Adjustments
With the time adjuster (2) you can adjust
the on-time you your applications.
With the adjuster you can adjust the
on-time for the connected and learned
receiver. The on-time can be adjusted
from 5 seconds to max. 12 minutes.
1. Turn the adjuster with a suitable
screwdriver towards T to set the
shortest on-time of 5 seconds.
2. Turn the adjuster towards + to set
the longest on-time of 12 minutes.
Mounting
tiltable sensor
19