Inhaltsverzeichnis
Werbung
Hints
Do not insert too many staples resp. nails into the magazine.
Do not insert broken stable strips as they could become
jammed.
Depress Safety
Press the trigger (1) completely down and secure it with the
depress safety (8).
Removing Staples
Position the stapler with the rear side under the
staple you want to remove and pull the staple
out of the material (see picture).
Staple Attachment
If you want to staple stags of paper or similar material, use the
staple attachment.
For driving in staples or nails into the material, remove the staple
attachment. To remove the attachment, first tilt it slightly forwards
and then take it off.
Eliminate the Malfunction
If the staples get jammed first press
both side wings (5) and push the
magazine backwards. Then pull it
down. Remove the jammed staples
and re-assemble the magazine.
Cleaning and Storing
Keep the magazine channel free from foreign objects.
Do not submerge the unit in liquids of any kind and only use a
dry cloth to clean it. At the utmost use a slightly wet cloth.
Store the unit in a dry place that is protected from dust and
dirt.
Operation
10
Werbung
Inhaltsverzeichnis
