Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Adjustment wheel
2. Hanging hole
3. Battery holder
7. Ventilation slots
Setting the clock
• Open the cover (6) by pressing the two plastic clamps towards the centre and
pulling them out.
• Twist the adjustment wheel (1) until the correct time of day is shown.
• Now insert a 1.5 V battery of type LR6 (AA) into the battery holder as shown (3)
• Finally, shut the cover (6) until the clamps lock in audibly.
Installation instructions
• Find a suitable location for the clock.
• Mark the position of the hole, and drill a hole into the wall.
• Hang the clock up vertically on a nail or a screw.
4. Sealing ring
5. Ventilation opening
6. Cover
Please note!
• The
hygrometer are calibrated after
manufacture.
• Do not install the clock near to
radiators, air conditioning systems
or water taps. These areas can
have a negative effect on the
measurements
hygrometer and the thermometer.
• Please ensure that the clock is
mounted vertically.
• If installed out of doors, ensure
that no splashed water can get in
through the ventilation slots (5).
• In order to ensure correct and
long-term functioning, regularly
clean dust and weather deposits
off the clock. The clock should be
wiped every year with a damp
cloth.
IV
thermometer
taken
and
the
by
the
Werbung
