You can set or change the current time on the Robot Cleaner.
Pressing 'Clock' button on the Remote Controller, when the Robot Cleaner is in standby
mode, will start the clock setting mode.
Select by using '
' buttons
on the Remote Controller.
The function can be heard
through the voice guide.
Tip
• Any scheduled cleaning will be activated based on the time on the Robot Cleaner. You must
set the clock before setting scheduled cleaning.
• If there is no input for 10 seconds, the clock setting is canceled.
Flashing
Flashing
Flashing
Flashing
Flashing
Flashing
TIME SETTING
Set the hour by using '
Remote Controller.
Set the minutes using '
Remote Controller.
Set the AM/PM using '
Remote Controller.
Pressing 'Clock' or 'Stop/OK' button
on Remote Controller will complete the
time setting process.
' buttons on
' buttons on
' buttons on
23