Finish Operation; Care And Maintenance; Accessories And Spare Parts - Kärcher AF 100 Handbuch

Finish operation

 Press the on/off operation button to switch the de-
vice off.
Storing the appliance
 Store the appliance in a dry room.

Care and maintenance

 First remove the mains plug before doing any job
on the device
 Wipe off the device with a dry soft cloth.
 If necessary, clean the pre-filter.
Filter replacement
If the filter change indicator lights up:
Illustration
 Open and remove the filter covers with the handles.
 Unlock and remove the pre-filter.
 Clean pre-filter.
 Remove the fine filter at the label from the device.
Note
– Both pre-filters always have to be cleaned.
– The pre-filter is washable.
– Both fine filters always have to be renewed.
Illustration
 Remove packaging from the filters.
 Insert the fine filter in the device. The label should
be visible from the outside.
Filter type
Universal Solution
(Standard equipment)
Allergy Solution
TVOC Solution
Smog Solution
Health Solution

Accessories and Spare Parts

Part number Application
2.863-029.0 Cleans all harmful substances from the air, improves indoor air quality com-
prehensively.
2.863-030.0 Effectively removes allergens such as pollen, mites, hair and smells suitable
for people suffering from allergy.
2.863-032.0 Filters harmful gases, such as formaldehyde, effectively. Suitable for refur-
bished rooms, e.g. with new furniture and carpet.
2.863-033.0 Effectively removes harmful particles from the air, applicable for indoor air
quality improvement in smog weather.
2.863-034.0 Effectively withholds bacteria that lingers in the air and effectively prohibits
bacteria from further spread and grow, suitable flue season or people with
health problems.
 Insert the guide noses of the pre-filter in the lower
recesses.
 Carefully lock the pre-filter at the top and at the
sides.
 Insert the guide noses of the filter cover in the lower
recesses.
 Close the filter cover from above.
Troubleshooting
Appliance is not running
 Plug in the power cord.
 Close the filter cover.
 Should the error continue to exist:
Do not press the on/off operation button again.
Contact customer service.
Air quality does not improve
 Make sure that all filters have been inserted cor-
rectly.
Airflow from the air outlet is no longer so
 Clean pre-filter.
– 8
EN
strong
13