4. Press the measuring key to toggle between displaying the time in
12-hour format or 24-hour format.
5. Press the mode key. The hour digit blinks.
6. Press the measuring key to set the hour digit.
7. Press the mode key. The minute digit blinks.
8. Press the measuring key to set the minutes.
9. Press the mode key to finish the setting mode.
Temperature Measurements
1. Before measuring, make sure the infrared sensor (4) is clean and
without any damage.
2. Press the measuring key (6) to switch on the thermometer.
3. Remove the top cover (7) from the laser and infrared opening
and put it to the backside of the device.
4. Press the measuring key (6). The infrared thermometer displays
the current temperature measurement.
5. If you hold down the measuring key, the reading of measurement
will be continuously updated.
Notes:
The measurement distance is 18 mm. Vary the distance of the
thermometer to the object to be measured until the two laser dots
converge.
12-hour format
Using
24-hour format
14