Use Of The Software - Hama Cyber Motion Bedienungsanleitung

Operating Instruction
Contents:
Part 1: The hardware
Part 2: The software

2.1 Use of the software

2.2 Remarks
Part 3: List of files
Part 4: Installation
4.1: Setup of USB version
4.2: Setup of Gameport version
Part 5: Characteristics
Part 1: The hardware
Supports both analogue and digital operation mode
Disposes of highly precise motion sensors for sensitive controlling
Supports 4 axes and 10 buttons / 3 axes and 12 buttons. The shift key enables a double assignment of the but-
tons. Thus, in total 4 axes and19 buttons / 3 axes and 21 buttons are at the user´s disposal.
Extensive functions: thrust control, D-Pad, shift key, 8 action buttons, activate button, touch key
The motion sensors can be switched on (green LED shines) and off (green LED foes out) by pressing the button.
The D-pad can be used for changing the viewing angle if the sensors are active (Coolie-Hat).
The controller works like a normal gamepad if the sensors are switched off
The directional control for the D-Pad (Coolie Hat) works like a usual gamepad when switching off the sensors.
Supports gameport and USB interfaces (connection to the gameport by DOS/Windows® 95/98; connection to
the USB interface only by Windows® 98)
Part 2: The software
Grade of motion, motional sensitivity and the range for X and Y axis can be adjusted by the help of the
software.
New, improved communication display: quick adjustment / control of the game profile data.
The Software Profiler enables the player to assign all buttons of the gamepad individually for every game
with keyboard commands (macros). It can be saved and called or changed at any time.
Two acion buttons can also be defined as an axis (Rudder control)
2.1 Use of the software
• Open the Profile Editor (use the startmenu or the taskbar)
• Click in the menu "name" the corresponding buttons on your gamepad which you would like to assign with
macros. The field will be marked chromatically.
• Then click "Record Action". A new tool bar is visible.
• Click the recording key (red point) and press the requested keyboard commands.
• For finishing the recording click at the black quader.
• You can clear the macros by clicking the "X". You can move the macro by the help of the arrow keys.
• Save the macros under "File" , "Save as" and give a name, e. g. "NFS4".
• Close the Profile Editor
L