Hama RC200 Bedienungsanleitung Seite 10

• After the Battery is installed, the LCD will turn on
and beep for 2 seconds. The clock will automatically
search the radio signal. It takes about 3.5 mintes to
fi nish this process.
• If the radio signal is received, the date & time will be
set automatically with radio controll signal icon
turns on.
• If the clock fails to receive the time signal, it will be in
Time/Temperatre display with the icon turns off.
Then user can set the time manually.
• Radio-controlled signal will be scheduled to receive
every hour.
Selecting Temperature/Alarm 1/Alarm 2/Dual time Display
• Press MODE will display the ALARM 1 time.
• Press MODE again will display the ALARM 2 time.
• Press MODE again will display the Dual Time.
• Press MODE again will display the Temperature.
Manual Time Settings
The system date and time can be set by pressing
MODE for 3 seconds in Time/Temperature display with
the icon turn off.
092630man_de_en_fr_nl_pl_pt.indd Abs1:9 092630man_de_en_fr_nl_pl_pt.indd Abs1:9
9
28.07.10 10:1 28.07.10 10:1