Alarm Mode - Hama EWS-800 Bedienungsanleitung

Note – Dew point
• The dew point temperature indicates a value to which, with the current humidity level, the outside
temperature would have to increase/decrease in order to reach 100% relative humidity.

6.5 Alarm mode

• Repeatedly press the ALM button (29) to access HI AL (4/11/16/21) or LO AL (4/11/16/21) alarm mode.
• In alarm mode HI AL (4/11/16/21), repeatedly press the SET button (28) to switch between the following
alarm functions:
• Alarm (hour/minute) (24)
• High room humidity alarm (14)
• High room temperature alarm (12)
• High outside humidity alarm (20)
• High outdoor temperature alarm (18)
• High absolute atmospheric pressure alarm (5)
The applicable display begins to flash.
• In alarm mode LO AL (4/11/16/21), repeatedly press the SET button (28) to switch between the following
alarm functions:
• Alarm (hour/minute) (24)
• Low room humidity alarm (14)
• Low room temperature alarm (12)
• Low outside humidity alarm (20)
• Low outdoor temperature alarm (18)
• Low absolute atmospheric pressure alarm (5)
The applicable display begins to flash.
• In the corresponding display, press the MIN/MAX button (30) or the + button (31) to change the alarm
value, and confirm your selection by pressing the SET button (28).
• In the corresponding display, press the ALM button (29) to activate/deactivate the corresponding alarm
function.
• If the alarm is activated, the corresponding symbol (6/10/15/26), HI AL (4/11/16) and/or LO AL (4/11/16)
is displayed.
• If you do not make an entry for 20 seconds, you automatically exit setup mode. Alternatively, press the
SNOOZE / LIGHT button (32) to exit setup mode before selecting all the values.
Note
• The set value is displayed for alarms that are already set, deactivated alarms are indicated by --- or --.
11