Inhaltsverzeichnis
Werbung
Using with Power Supply Unit
1. Place the mini air conditioner on the surface in your
house or office and make sure the unit cannot drop.
The mini air conditioner can be turned to the desired
direction. Additionally you can adjust the direction of
the air flow using the lever (5). We recommend
placing the air conditioner approx. 50 cm away from
you to achieve best cooling performance.
2. Remove
compartment (3). Unscrew the cap of the water tank
and fill in cold and clear water. Do not fill scents or
chemicals into the water tank.
3. Re-insert the water tank into the compartment (3)
and wait approx. 15 minutes so the fibre strips of the
absorber (9) can soak with water.
4. Connect the power supply unit with the jack (11) of
the air conditioner and a wall socket.
5. Switch on the air conditioner with the 2-stage switch.
In stage I the unit operates in low speed, and in
stage II it operates in maximum speed. To switch off,
set the switch to position O. For a better cooling
effect use the 6 included ice pack cylinders. Fill them
will water and freeze. Then insert one or several ice
pack cylinders into the water tank.
6. After use disconnect the power supply unit from the
air conditioner and from the wall socket.
the
water
Using
tank
(1)
16
from
the
tank
Werbung
Inhaltsverzeichnis
