Setting The Video Output Format; Restoring Factory Defaults - Siemens Gigaset M270T Bedienungsanleitung

Settings
...
> Box Settings > Video Settings > Screen Format
1. Select the screen format.
!
2. Press to exit the menu.

Setting the video output format

The Settings menu enables for specifying a.o. the video output settings. Please note:
The formats RGB, Video and S-Video are provided for the "TV video output".
u
The "VCR video output" (video recorder output) only disposes of the Video and
u
S-Video settings.
Having selected RGB for the TV output, only the Video option will be made available
u
for the VCR output.
Note: If you are not aware of the format your TV set supports, simply check which
setting brings about the best picture representation.
...
> Box Settings > Video Settings > TV Output Format / VCR Output Format
1. Select the video format with the optimal image reproduction. VCR Output Format
enables for setting the screen format of a video recorder if connected.
!
2. Press to exit the menu.

Restoring factory defaults

You can reset the device to default settings. In doing so, the individually composed
favourites list is deleted.
...
> Box Settings > Restore Factory Settings
16
4:3 format wide screen (letterbox):
Zooms out of 16:9 format films to scale down to 4:3 format
TVs by adding a black bar above and below the picture on the
screen.
4:3 format CCO/Pan Scan (enlarged):
Presents films in the 16:9 format in a screen-filling manner.
With regard to 4:3 TVs, the left and right picture border is cut
off.
4:3 (Letterbox 14:9)
Zooms out of 16:9 format films to scale down to 4:3 format
TVs by adding a black bar above and below the picture on the
screen.
Additionally the left and right border is slightly cut off