System Setting; Initial Setup - LG BB4330A Benutzerhandbuch

24

System Setting

Initial Setup

When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
1. Press 1 (POWER).
The initial setup wizard appears on the screen.
2. Use W/S/A/D to select a display language
and press ENTER (b).
3
3. Read and prepare the preparations for the
network settings and then press ENTER (b)
while [Start] is highlighted.
If wired network is connected, the network
connection setting will automatically be
finished.
If you have security on your access point, you
need to input the security code as necessary.
4. Select [Next] and press ENTER (b).
5. You can listen to TV sound through this unit's
speaker automatically when TV is turned on. TV
and this unit should be connected with optical
cable.
Press W to move and press A/D to select [On]
or [Off ]. Select [Next] and press ENTER (b).
6. Check all the settings that you have set in the
previous steps.
Press ENTER (b) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use W/S/A/D to
select 1 and press ENTER (b).