Attachment Possibilities In The Front En; Mounting Information - Kärcher MIC D Bedienungsanleitung

6.3.4 Tilt function with attached appliances
3-point and 4-point retainers have an incorporated function
in order to adjust the inclination of the attachments.
When the bolt is pulled, the attachment can swing on

the side in a lowered condition.
6.4 Attachment possibilities in the front
6.4.1 3-point retainer (optional)
6.4.1.1 Mounting the attachment
The 3-point retainer has lower links (with tilt function) and
one upper link.
In order to mount the 3-point retainer on the front power

lift, drive up to the attachment and connect the lower
links to the attachment.
Fixate with 2 bolts and secure the bolts by means of
safety cotters.
Then connect the upper link to the attachment.

Correspondent to the attachment the following must be ob-
served:
6.4.1.2

Mounting information

CAUTION
Risk of damage!
After the installation of the upgrade kit, it must be care-

fully checked that the driver's cabin or attachments are
not damaged upon raising it.
To avoid damage caused by faulty installation, observe

the following charts.
Attachment mounted incorrectly
The upper connection from the vehicle to the attachment is
mounted incorrectly. The angle differs too much from the
lower fixture.
If the upgrade kit is raised, this leads to a sudden fold-up
of the attachment towards the driver's cabin and thus to
damaging the windshield or other attachments.
86
When completely lifted, the attachment is aligned hori-

zontally.
WARNING
Do not install, raise or move attachments when persons
are in the vicinity of the machine.
1 3-point retainer
2 Lower link
3 Fixture for upper link
Sufficient clearance to the driver's cabin or surface
–
mountings must be observed.
Note
Contact must be ruled out.
Mind the weight of the attachment.
–
Note
Heavy attachments must be mounted as close to the
vehicle as possible.
The more the angle to the lower fixture differs while the at-
tachment is standing on the ground, the more the attach-
ment will be tilted towards the back upon raising it.
Attachment correctly mounted
The upper connection from the vehicle to the attachment is
mounted correctly. The angle of the connection is much
flatter than with the incorrectly mounted connection. This
avoids damaging the driver's cabin upon raising the at-
tachment.
29
-
EN