Inhaltsverzeichnis
Werbung
Hints
Please keep in mind that smaller items such as volley- or footballs are
filled very quickly. Keep an eye on the item while it is inflated to prevent
over inflation.
Check the pressure with a calibrated pressure gauge.
Do not leave the compressor unattended while it is in operation.
Do not use the compressor for more than 10 minutes continuously and
allow it to cool down for at least 15 minutes.
Pressure Specifications Examples (Approx. Data):
Vehicle Tyre
Bicycle Tyre
Football
Basketball
Volley Ball
Using the Emergency Light
1. Press the switch (4) in direction „LIGHT", to switch on the emergency light.
2. Press the switch (4) in direction „FLASH", to switch on the flashing light.
3. In the position „OFF" the lamp is switched off.
Remove the coloured lid by turning it off. You will find inside a bright cover in
order to use the emergency light as a work lamp.
Cleaning
Before undertaking any cleaning on the compressor, pull the power plug
and allow the unit to fully cool down.
Use only a damp cloth to clean the unit. Do not use aggressive chemicals
or abrasives.
Do not immerse the unit in water or any other liquids.
Operation
1.65 – 2.2 Bar
2.4 – 2.8 Bar
0.9 Bar
0.6 Bar
0.34 Bar
7
Werbung
Inhaltsverzeichnis
