Recording - Westfalia 84 68 19 Bedienungsanleitung

Operation
you can return to the previous menu with the OK button.
Selecting one or several cameras with the "Cam" and
"Screen" Buttons
Up to four cameras can connected to the monitor unit. With the
"Screen" button you can switch from the individual display to the
quad view and back. With the "Cam" button you can switch
between the cameras.
The sound of the selected camera is played, if you desire to hear
the sound from another camera in the quad view, switch back to
the individual display and select another camera.

Recording

To record a video on demand press the "Rec" button. Recording
starts when you press the button and ends when the button is
pressed again.
To perform settings for the recording function, select "Recording"
in the main menu and confirm your selection with the OK button.
You can use the UP and DOWN buttons to navigate within the
following menu.
Under the menu point "Manual Capture" you can record photos
and videos on demand. With the buttons < and > you can select
between one, three and five photos and videos with a length of 5,
10 and 30 seconds or one minute in length. From the menu line
"Exit" you can return to the previous menu with the OK button.
Press the "Rec" button to record as pre-set.
With the „Loop recording" function you set the selected camera(s)
to continuous recording, once the memory is full, it will be
overwritten. With an empty 32 GB memory card you can record
for a full 7 days in the "low" resolution setting. Select the menu
line with the OK button and under "enable" turn the function on
and off with the < and > buttons. The loop recording symbol
appears in the display. From the menu line "Exit" you can return
to the previous menu with the OK button.
26