Operation With Motion Sensors; Memory Medium; Formatting The Memory Card - Westfalia 84 68 19 Bedienungsanleitung

Operation with Motion Sensors

Use the direction keys to select "Motion Sensor" in the main
menu and confirm your selection with the OK button. Use the UP
and DOWN buttons to select the menu line "Enable" from the
following menu. With the < and > buttons the motion sensor can
be turned on and off. In the menu like „Sensitivity" the sensitivity
of the motion sensor can be set to „high", „standard" or „low" with
the < and > buttons. From the menu line "Exit" you can return to
the previous menu with the OK button.

Memory Medium

The Monitor unit is equipped with a slot for a micro SD card for
saving recorded videos. The installed software supports cards
with a memory capacity of up to 32 GB. With a 32 GB card it is
possible to record for up to 7 days continuously in the "low"
quality setting.

Formatting the Memory Card

Use the direction keys to select "Recording" in the main menu
and confirm your selection with the OK button. Use the UP and
DOWN buttons to select the menu line "SD Format" from the
following menu and confirm your selection with the OK button.
You can now use the UP and DOWN buttons to select if you wish
to format the memory card. During formatting all information on
the memory card is erased. Select "yes" to format the card or "no"
to return to the previous menu. Confirm your selection with the
OK button.
Operation
23