Led Display - Klarstein 10021651 Bedienungsanleitung

LED Display

The LED display shows the numeric values for temperature and relative humidity and the length of
time remaining on the timer. It also displays the icons used to indicate other humidifier functions.
LED Display Icons and Values: LED Display Icons and Values:
16 Empty water tank indicator icon
17 Timer setting on/off indicator icon
18 Value of time remaining in timer, Shows values for both the desired relative humidity and the
actual relative humidity
19 Ions on/off ! Indicator icon
20 Humidity setting on/off indicator Icon
21 Mist volume indicator (low, medium and high)
Operating Instructions
Before getting started. please remove the SPS-807 from its box and allow it to become accustomed
to the room temperature for at least 30 minutes especially if the machine is cold from the outside air.
The SPS-807 is designed to operate at temperatures between 5-40℃ and relative humidity of less
than 80%.
To get started, grasp the water tank by the handle at the top and lift from the base. Next fl ip the tank
over and unscrew and remove the water tank lid antd filter
Then place the water tank under the faucet for fi lling' grasping it from the handle under the water
tank. Fill the tank with tap water (or other clean water source with water temperature under 40℃ ),
12