Hama Premium Bedienungsanleitung Seite 4

G Operating instruction
Controls and Displays
1. LCD screen = Displays the time and programme
status
2. SET = Use to select the operating mode or to
adjust hours, minutes and days when entering
the time or setting a programme
3. CLOCK / OK = Sets the time (entry mode) or
confirms the time or programme
4. RESET = Resets all entries
5. PROG = Switches to programming mode
6. UP / CLEAR = Enters values for the time and day
of the week or deletes a programme
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol indicates product parts energized
with a dangerous voltage of sufficient magnitude
to constitute a risk of electric shock.
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2
2. Package Contents
• Digital Weekly Timer
• These operating instructions
3. Safety Notes
• Do not operate the product outside the power
limits given in the specifications.
• Protect the product from dirt, moisture and over-
heating, and only use it in a dry environment.
• The product is intended for indoor use only.
• Do not drop the product and do not expose it to
any major shocks.
• Keep this product, as all electrical products, out of
the reach of children!
• Dispose of packaging material immediately accord-
ing to locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
Warning
• Only connect the product to a socket that has
been approved for the device. The socket must
be installed close to the product and easily
accessible.
• Never connect multiple units of this product
in series.
• Never connect the timer switch to an extension
cable or adapter. It must be plugged directly
into a mains socket. Connecting the timer in
any other way may cause it to overheat.
• Do not use any heat-generating devices (such
as electric blankets, coffee machines, etc.) with
this product. There is a risk of fire and injury.
• Do not use this product with any devices
that are motorised or any devices that have a
rotating component or workpiece. There is a
risk of injury.