Before First Use; Use And Operation - Klarstein 10028951 Hinweise

1. Remove all packaging materials.
2. Remove any stickers or labels from the appliance. (Except the rating label!)
3. Thoroughly clean the basket and the pot with hot water, some washing-up liquid and a non-abrasive
4. sponge. You can also clean these parts in the dishwasher.
5. Wipe the inside and outside of the appliance with a moist cloth. This appliance works on hot air. Do not fill
the basket with oil or frying fat.
6. Use on a flat and stable, heat resistant work surface, away from any water splashes or any sources of heat.
Hints on Use
• When in operation, never leave the appliance unattended.
• This appliance is not designed to be used by people (including children) with a physical, sensory or mental
impairment, or people without knowledge or experience, unless they are supervised or given prior instruc-
tions concerning the use of the appliance by someone responsible for their safety.
• Children must be supervised to ensure that they do not play with the appliance.
• This electrical appliance operates at high temperatures which may cause burns. Do not touch the hot sur-
faces of the appliance (pot, air outlet...).
• Do not switch on the appliance near flammable materials (blinds, curtains...) or close to an external heat
source (gas stove, hot plate...etc.).
• In the event of fire, never try to extinguish the flames with water. Unplug the appliance. Close the electric
brake, if it is not dangerous to do so. Smother the flames with a damp cloth.
• Do not move the appliance when it is full of hot food.
• Never immerse the appliance in water!
1. Carefully pull the pot out of the fryer horizontally, and put the ingredients into the basket.
2. Note: Never fill the basket exceed the amount indicated in the table, as this could affect the quality of the
end result. Slide the pot back into the fryer. Never use the pot without the basket in it. Warning: Do not
touch the pot during and some time after use, as it gets very hot. Only hold the pot by the handle.
3. Standby mode: Connect the mains plug to an earthed wall socket, then hear the acoustic notice, display shows
icon flickering on the control panel. After finish cooking or without any operation for 1min, the fryer will turn to
standby mode automatically.
4. Unlock & Temperature setting: Press
"10min". Press the arrow buttons to increase or decrease the temperature, temperature "±5°C" with every
press or long press to the wanted temperature. Max: 200°C, Min: 60°C.
5. Time setting: press + or - to adjust the working time from 10min, time will "±1min" with every press or long
press to the wanted time. Max: 60min, Min: 1min.
6. Start cooking: after finishing setting of temperature and time, press Start button to start cooking, display
shows fan icon , pre-set temperature and remaining time shows on display during cooking.
7. During cooking, you are able to adjust the temperature and time if wanted.
8. Stop/Pause: press
9. Finish cooking: when cooking time out, can hear a chord ringtone notice, display shows
heating, then turn to standby mode automatically.
10. Fast cooking: press

Before first Use

Use and Operation

for 3s to unlock, then display will light up and show "180°C"
to make the fryer stop working, press again to continue.
button to have fast cooking, cooking start with 180°C and 10min acquiescently, you
, and stops
10