Werbung
Operation
Functionality
The marten repeller generates bright flashes of
light and an acoustic signal with a frequency of 12
to 23 kHz in intervals. This ultra high frequency is
sensed by the martens as perturbing and nasty, so
that they flee from the corresponding vehicle.
Assembly
The marten repeller can be fixed in the engine
compartment by means of self-tapping screws or
cable ties on the carriage. The connecting cable to
the car battery must be passed in that manner that
it does not get in contact with movable or hot parts
(e.g. ventilating wheel, exhaust manifold). The
device should be installed in the engine compart-
ment in that manner that the acoustic noise can
constantly spread and is not absorbed by insulat-
ing mats.
ATTENTION: Assembling should be carried out by
authorised specialised staff!
If a marten repeller is installed in your vehicle it is
advisable to inform service technicians about the
presence of the device when the vehicle is turned
in for repair or maintenance.
13
Werbung
