Bluetooth Mode - Grundig M 1100 Handbuch

BLUETOOTH MODE

Compatible with the following
devices
Your M 1100 can be connected to any com-
mercially available Bluetooth-compatible de-
vices that comply with the A2DP standard. This
includes smartphones, laptops and tablet PCs,
for example.
Selecting the Bluetooth input
source
1 Select the Bluetooth input source by pressing
» « on the device or »
remote control.
– Display: »BT DISCONNECT«.
Finding and connecting a Blue-
tooth auxiliary device
1
Activate the Bluetooth function on the Blue-
tooth auxiliary device.
2
Start the search function on the Bluetooth
auxiliary device.
– After a short time, your M 1100 will be dis-
played on the Bluetooth auxiliary device.
3
Select the M 1100 on the Bluetooth auxiliary
device and connect to it.
4 When the Bluetooth auxiliary device is con-
nected to your device, »BT« is displayed on
the M 1100.
Note:
Your M 1100 can only receive and play
7
the audio signal from one Bluetooth device;
however, up to 8 Bluetooth auxiliary de-
vices can be logged on.
Activating a Bluetooth auxiliary
device that is logged on
Notes:
You only have to log Bluetooth auxiliary
7
devices on once.
When the Bluetooth auxiliary device leaves
7
and then moves back into signal range of
the M 1100, the auxiliary device logs on
automatically.
---------------------------------------------------------------------------------------------------
AUX« on the
The M 1100 automatically connects to the
7
last Bluetooth auxiliary device that was
logged on.
If the Bluetooth auxiliary device is not rec-
7
ognised, it has to be activated again via its
own menu.
Playback from the Bluetooth
auxiliary device
1
Start playback on the Bluetooth auxiliary
device.
2
Set the preferred volume with the control knob
on the hi-fi system or press
remote control
3
End playback on the Bluetooth auxiliary de-
vice.
Notes:
Various functions can also be controlled on
7
the M 1100.
Press » e II« to pause playback,
II« again to resume playback;
press » e
press » « to select the previous track and
» « for the next track.
Note that the data transmission range can
7
be as much as 9 m, depending on the Blue-
tooth device that is used and the structure
of the building.
Logging out the Bluetooth auxiliary
device
1 Log out the Bluetooth device or press and
hold down » « on the M 1100.
7
– The display changes to »BT CLEAR«.
Logging the Bluetooth device back
on
1
If you move out of data transmission range or
switch off Bluetooth mode, the Bluetooth aux-
iliary device is logged out.
2
To log back on, select your M 1100 again on
the Bluetooth auxiliary device.
Note:
If it is not possible to connect to a Blue-
7
tooth auxiliary device that was registered
previously, remove your M 1100 from the
Bluetooth auxiliary device's device list and
repeat the search and connection proce-
dure.
»– VOL +« on the
31
ENGLISH