Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GENERAL FUNCTIONS
Switching on and off
The only way to disconnect the hi-fi system from
the mains supply is to pull out the plug.
1
Switch on the hi-fi by pressing »
on the device.
– The last input source used is automatically
selected.
Note:
The hi-fi system can also be switched on by
7
pressing»
8
«, »FM«, »CD«, »USB« or
AUX« on the remote control.
»
2
Switch the hi-fi system to standby mode by
pressing »
8
«.
ECO mode
The hi-fi system switches to standby in the ECO
mode after 15 minutes. This lowers the power con-
sumption to below 0.5 W.
In ECO mode, the time display disappears; you
can display it by pressing »
1
In ECO mode, press »
– The clock is displayed
2
In ECO mode, press and hold down »
seconds.
– The device switches to standby, the clock is
displayed.
– The device switches back to ECO mode after
15 minutes.
Automatic switch-off
The device switches off automatically after 15
minutes in standby mode if:
– the device is in the stop position;
– there is no audio signal detected at the
IN« socket;
»AUX
– the Bluetooth auxiliary devices is not sending
an audio signal.
To use the device, switch it back on.
Adjusting the volume
1
Turn the control knob on the hi-fi system or
press »
–
+« on the remote control to
V
change the volume.
8
« or »
¥
«.
¥
« once.
8
« for two
---------------------------------------------------------------------------------------
Selecting sound settings
You can choose between preset sound settings.
1
Select the sound setting using »DSC« on the
«
remote control.
Enhancing the bass
1
Enhance the bass with
remote control.
Loudness
The loudness function provides better sound at
lower audio volumes.
1
Switch loudness on and off using »
« on the remote control.
NESS
Note:
Selecting a different sound effect will cancel
7
the setting of S-BASS or Loudness.
Muting
You can switch the hi-fi speakers to and from
mute mode with this function.
1
Activate mute with » « on the remote control.
2
Deactivate mute with » « on the remote con-
trol.
Displaying the time
1
Display the time with »
trol.
Setting the brightness of the dis-
play
1
Adjust the brightness of the display (3 stages)
R
with »
« on the remote control.
+« on the
»S-BASS
LOUD-
¥
« on the remote con-
27
ENGLISH
Werbung
Inhaltsverzeichnis
