Operating Instruction BDS 33/190 C, BDS 43/150 C, BDP 43/410 C, BDS 43/Duo C English
Cleaning and care
– Only use a damp cloth for cleaning the
unit
– Wipe afterwards with a clean, dry cloth
– Do not use chemical cleaning agents
Frost protection
– Store the cleaner in a room protected
from freezing
– Empty the cleaning agent tank
(accessory)
24
Malfunctions
Unsatisfactory cleaning results
■
Replace worn brush wheel attachment/
pad
■
Change dirty pads and wash at max.
60°C.
■
Check that the brush wheel attachment
or pads and the cleaning agent are
appropriate to the job on hand
Brush wheel attachment/pad drive disk
does not rotate
■
Change dirty pads and wash at max.
60°C.
■
Remove jammed foreign bodies
■
Adapt the brush wheel attachment/pad
to the cleaning object
■
Reset motor circuit breaker by pressing
the button
(BDS 43/Duo C only)
Cleaner runs unevenly or vibrates
heavily
■
Check proper fit of brush wheel
attachment/pad drive disk
■
Check correct fit of the pad on the pad
drive disk
■
Check whether the suitable drive disk is
used
No or insufficient cleaning agent
solution on the floor
■
Refill cleaning agent tank (accessory)
with cleaning agent solution
■
Check functions of hoses and valve
The unit must be checked by after sales
service if the problem cannot be
remedied.