Replace splash guard
1 Splash guard
2 Holding ring
Pull the retaining ring with the splash
guard off the cleaning head towards the
top.
Remove the worn splash guard from
the retaining ring and dispose of.
Push new splash guard onto the knobs
of the retaining ring.
Attach the retaining ring with the splash
guard to the cleaning head.
Maintenance contract
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
22
Removing the battery
DANGER
The removal of the battery may only be per-
formed by the Kärcher aftersales service or
a specialist.
The evaluation, whether the battery is dam-
aged or not, is done by an authorised after-
sales technician
The Chapter "Safety instructions" for han-
dling accumulators must be observed un-
conditionally.
1 Screw
2 Cover
Unscrew 2 screws.
Swivel the lid downwards.
Loosen and remove the battery plug.
Remove the battery.
Dispose of used battery in accordance
with the applicable provisions.
– 8
EN
Disposal