Kärcher BDP 43/1500 C Bp Originalbetriebsanleitung Seite 12

Attach the pad
Warning
Risk of damage!
Do not store the appliance with inserted pad.
Always remove the pad after every use.
Tilt the appliance slowly backward if the de-
tergent tank (optional) is attached.
Î Turn main key to "0" and remove the key.
Î Pull the lever for level adjustment and
bring the handle in a vertical position.
Î Tilt the appliance backward and store it
on the handle.
1 Nut
2 Tool
Î Unscrew the nut in the clockwise direc-
tion using the enclosed tool.
Î Place the pad on the centre of the driving
plate and press it slightly.
Î Screw the nut in the anti-clockwise direc-
tion and tighten it using the enclosed
tool.
Î Remove the tool.
Î Tilt the appliance forward.
12
English
Attach prespray appliance (option)
Î Hold both clamp halves to the pipe with
the bevel facing upwards.
Î Connect the clamp halves using M6 x 50
screws and self-securing nuts and tight-
en the nuts.
Î Attach the spray bottle to the sides of the
clamps using M6 x 30 screws and nuts.
Î Hook rope to the trigger level on the
spray bottle at the dosing lever of the
prespray appliance.
Î Adjust the rope length so that the black
trigger lever is flush with the handle.