Drivers; How To Configure With Aminstal; Assigning Interrupt Channels - Siemens 6GK1141- 1AA00 Installationsanleitung

Installation Instructions CP 1411

3.4.2 Drivers

Drivers

3.4.3 How to Configure with AMINSTAL

Procedure

3.4.4 Assigning Interrupt Channels

Interrupt Channels
Procedure
40
The installation of the individual drivers under the various operating
systems is described in the installation instructions on the diskette.
The AMINSTAL program is easy to handle:
Step
1 Switch on your computer.
2 Start the AMINSTAL program.
The CP 1411 can be set to the following interrupt channels (IRQ) on
your PC/programming device:
Possible Interrupt
Numbers (IRQ)
This setting is made when you configure the module with AMINSTAL.
Make sure that the selected interrupt channel on your
PC/programming device is not used by any other module.
Procedure
3 4 5 9 10 11 12 15
Installationsanleitung CP 1411
C79000-Z8974-C24-05