Herunterladen Inhalt Inhalt Diese Seite drucken

Introduction & Features; Security Measures; Installation And Mounting - Velleman HAM2SD Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

HAM2SD – PHOTOELECTRIC SMOKE DETECTOR
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for purchasing this device. Please check carefully that there is no damage caused by transportation.
Should there be any, consult your dealer and don't use this device. Read this manual carefully before bringing the
device into use.
Tested according to EN14604 as far as applicable.
Currently there are two kinds of smoke detectors available: the ionization alarm and the photoelectric smoke detector.
Although both alarm types are suitable for general home use, an ionization alarm will react to blazing fires more
quickly whereas the photoelectric detector is more sensitive to smouldering fire. Because of the fact that fires
develop in an unpredictable way and that it is impossible to predict their magnitude, it is not possible to tell which kind
of alarm system will give the earliest possible warning. That is why it is advisable to install both types to ensure the
best possible home security.

2. Security measures

• In certain situations, a smoke or fire detector will not provide protection against fire as defined in standard NFPA
74. For example:
when smoking in bed,
when children are in the house without supervision,
when cleaning with inflammable liquids (gasoline).
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• All modifications of the device are forbidden for safety reasons. Damage caused by such modifications is not
covered by the warranty. Never overload the machine.

3. Installation and mounting

Your smoke alarm is designed for easy ceiling mounting. A complete installation kit is supplied with every smoke
alarm. First, hold the mounting brackets to the ceiling and mark the 2 drilling holes. Drill the holes and attach the
mounting brackets to the ceiling with the supplied screws.
For wooden panelling and wooden beams, use a 2.5mm drill and drill to a depth of only 20mm. Attach the support
with the supplied screws.
For concrete or brickwork, use a 5.5mm drill and drill to a depth of 25 – 30mm. Make sure that the plugs have a
secure grip in the drilling holes, should this not be the case, look for another drilling position or use other plugs.
Insert the battery and attach the alarm system to the brackets. The system is equipped with a safety which makes it
impossible to attach the alarm system to the bracket without the battery having been inserted first. When the alarm
does not fit into the brackets, make sure the battery is inserted correctly.
HAM2SD_v3
2
VELLEMAN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis