Advice On Disposal - Bosch sensixx B35L Gebrauchsanleitung

Problem
Dirt comes out • There is a buildbup of scale or minerals in
through the sole the steam tank.
plate.
• Chemical products or additives have been
used.
The iron does • The boiler is not switched on or the water
not produce any tank is empty.
steam. • The water tank is not fitted onto the
housing correctly.
• The steam regulator is set to the minimum
position.
The ironed garb • The selected temperature is too high and
ment turns dark has damaged the garment.
and/or sticks to the
soleplate.
The soleplate turns • This is a regular consequence of usage.
brown.
The iron does not • "Intelligent steam" function activated.
stop steaming after
placing it on the pad.
The appliance • Water is being pumped into the steam tank.
makes a pumping • The sound will not stop.
sound.
Loss of pressure Steam release button activated during a
during ironing. long period of time.
Water leakage from Drainage plug located at the bottom of the
the boiler appliance is loose.
If the above does not solve the problem, get in touch with authorized technical service.

Advice on disposal

Our goods come in optimised packaging. This
basically consists in using nonbcontaminating
materials which should be handed over to the local
waste disposal service as secondary raw materials.
Your local town council can give you information
about how to dispose of obsolete appliances.
You can download this manual from the local homepages of Bosch.
Possible causes
The guideline determines the framework for
the return and recycling of used appliances as
applicable throughout the EU.
Solution
• Use tap water mixed 50% with dis tilled
or demineralised water. If the tap water
in your district is very hard, mix tap
water with distilled water 1:2.
• Clean the sole plate with a damp cloth.
• Never add products to the boiler
water.
• Set the main power button (8) to the
"I" position and/or fill the water tank.
• Fit the water tank back onto the houb
sing correctly (you will hear a click).
• Increase the steam flow by turning the
steam control (5).
• Select a suitable temperature for the
material being and clean the sole
plate with a damp cloth.
• Clean the soleplate regularly with a
damp cloth.
• Just press the trigger once again and
the iron will stop steaming at once.
• This is normal.
• If the sound will not stop, do not use
the steam generator and contact an
authorised technical service centre.
Use the steam release button (15) with
intervals. This improves the ironing
result as the textiles will be dried and
stay smooth better.
Tighten up boiler drainage plug with a
coin
This appliance is
accordance with European Directive
2002//EG concerning
electrical and electronic appliances
(waste electrical and
equipment s WEEE).
en
labelled in
used
electronic
15