Safety Notes - Westfalia 81 80 51 Bedienungsanleitung

Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical injury:

Make sure the voltage corresponds to the type label on the unit.

Persons with limited physical, sensorial or mental abilities are not allowed to
use the machine unless they are supervised and briefed for their safety by a
qualified person.

Operate the machine only for planning wooden material such as beams and
boards. Do not plan over metal objects such as nails or screws. This will
damage the blade shaft and the planing blades.

Do not process material containing asbestos.

When working with the electric planer always wear safety goggles
and dust musk. Wear appropriate clothing. Take off jewellery and tie
up long hair.

Protect your hearing. Wear appropriate ear protection.

Hold the planer with both hands on the handles. Never lay down
your hand near or in front of the machine on the workpiece surface.

Secure the workpiece against slipping. Never hold the workpiece in
your hand while planning.

Lay down the electric planer after it has come to a complete standstill.

Attention: When working with some materials, hazardous dust and wood
chips will be formed. Take protective measures.

Do not grasp into the planning debris opening (3). Avoid contact with rotating
parts as well as with the planing blades.

Always switch on the machine before placing it against the workpiece.
Otherwise the machine could kick back.

Make sure the planning sole lays flat against the workpiece, so the machine
cannot get snagged.

Only operate the machine with all planing blades mounted.

Do not operate the machine without the belt cover.

Always use the parallel guide (21) resp. the rebate depth stop (23) in order to
precisely guide the machine.

Safety Notes

11