The Filehandler Commands - Siemens Moby J31069-D0126-U001-A6-7418 Bedienungsanleitung

R 05/07
The "FILEHANDLER" program is designed so that you can use the same func-
tions to access the files on the hand-held terminal and the files on the MDS.
The directory display is available for both the hand-held terminal and the MDS.
MDS files can be copied from the MDS to the hand-held terminal (and vice
versa) with just a few keys.
An optional connection to the PC permits you to exchange files stored on the
hand-held terminal with the PC.
You can then process the data with your familiar PC programs (e.g., WORD,
EXCEL, and so on). Prerequisite: The PC application must support the con-
tents and data structure of the MDS file. See also chapter 6.
Note
Remember that the filehandler is only available for the MOBY I.
5.2

The Filehandler Commands

STG Command
File/Read File from
Tag
File/Read File from
STG RAM
File/Write File to Tag
File/Write File to STG
RAM
File/Read Dir from Tag G
File/rRad Dir from STG
RAM
File/exit
Commands/Create
File
Commands/Delete File D or Del
Commands/Tag For-
mat
Commands/File Attrib-
ute
Commands/Tag Status F
STG Hand-Held Terminal PRO
(5)J31069-D0126-U001-A6-7418
1
Shortcut Filehandler
Command
R or Enter READ
S –
W WRITE
T –
DIR
P –
X –
B CREATE
2
DELETE
I FORMAT
Y ATTRIB
MDS STATUS Read MDS status
The "FILEHANDLER" Program
Description
Read a file from the MDS
Read a file from the RAM of
the hand-held terminal
Write a file to the MDS
Write the data from the editor
to the hand-held terminal
Read directory from the MDS
and indicate
Indicate directory of the STG
(RAM memory)
Exit filehandler application
Create new file with length of
0 on the MDS
Delete file from the MDS
Format the MDS
Assign access rights to file
on the MDS
E-31