Connecting Cables - Samsung ICD-833P/ACDC Bedienungsanleitung

Connecting Cables and Checking Operation
1 First, connect the connector of the BNC cable to the Video Out terminal
E
2 Second, connect the other connector of the BNC cable to the Video In
terminal.
Video In Terminal of
Monitor Rear Surface
BNC cable
Video Out Terminal
3 Then, connect the power adapter. Connect a part of the power adapter
composed of 2 lines to the Camera Power In terminal with a flat-head
driver as follows.(GND : marked with a white line)
* Power source may be AC24V or DC12V irrespective of polarity
18
ICD-833P/ACDC
ICD-833P/AC
E
19