First Use; Using The Appliance; Frothing Milk - Philips Saeco HD 7019 Bedienungsanleitung

4 First use

Rinse the milk jug, the lid and the frothing coil
with hot water and dry all parts before you
use the appliance for the first time.

5 Using the appliance

You can use the appliance to make hot or cold
milk froth, or to heat up milk without frothing it.
Caution:
C
Only use the appliance to heat up or froth milk.
Do not use it to process any other ingredients.
Put the mains plug in an earthed wall
1
socket.
2
Remove the milk jug from the base.
3
Turn the lid anticlockwise and lift it off the
milk jug.
Fill the milk jug with fresh cold milk to a level
4
between the MIN and MAX indications.
Note:
D
Use chilled semi-skimmed cow's milk for
the best frothing result.
4222_200_0544_2_DFU-booklet_128x180_v1.indd 5

5.1 Frothing milk

Make sure the frothing coil is attached to the
1
frothing rod. If it is not attached, push one side
of the frothing coil onto the frothing rod (1)
and then push the other side onto the frothing
rod (2).
Put the lid onto the milk jug (1) and turn it
2
clockwise to fix it (2).
Start the frothing process:
3
•
To prepare hot frothed milk, press the
button for hot frothed milk. The button
lights up red.
5
8/12/11 11:16 AM