Maintenance - Sharp CP-RW5500H Bedienungsanleitung

„ If trouble occurs
When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and plug in the unit,
and then turn the power on.
„ Clearing all the memory (reset)
If neither operation above restores the unit, clear all the memory by following
the instructions below.
1 Press the ON/STAND-BY button to enter the power stand-by mode.
2 Whilst pressing down the VOLUME button, press the ON/STAND-BY button
until "ALL CLEAR" appears.
Caution:
This operation will erase all data stored in memory including clock, timer settings,
tuner preset and CD programme.
„ Before transporting the unit
On the back of this unit is equipped with a transport safety screw in order to prevent
damage during transportation.
1 Press the ON/STAND-BY button to turn the power on.
2 Remove all discs from the unit, close the disc tray. "CD NO DISC" is displayed.
3 Press the ON/STAND-BY button to enter the stand-by mode. "GOOD-BYE" is dis-
played.
4 When "GOOD-BYE" disappears, unplug the AC power lead from the AC socket.
5 Insert the transport safety screw into the back of the unit and tighten it with a flat-
blade screwdriver.

Maintenance

„ Cleaning the tape-handling parts
z Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean
these parts with a cotton swab moistened with commercial head/pinch roller
cleaner or isopropyl alcohol.
z When cleaning the heads, pinch rollers, etc., unplug the unit which contains high
voltages.
C
D
: Erase head
: Recording/Playback head
z After long use, the deck's heads and capstans may become magnetised, causing
poor sound. Demagnetise these parts once every 30 hours of playing/recording
time by using a commercial tape head demagnetiser. Read the demagnetiser's
instructions carefully before use.
„ Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
Caution:
z Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the
cabinet finish.
z Do not apply oil to the inside of the unit. It may cause malfunctions.
01/1/9 E4.fm
C
B
D
A
: Capstan
: Pinch roller
ENGLISH E-37