Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.
5. OPTIONS
Activate or deactivate the options
before the start of a programme.
You cannot activate or deactivate
the options while a programme
operates.
If one or more options are set,
make sure that the related indica-
tors are on before the programme
starts.
5.1 MyFavourite
With this option you can set and save the
programme that you use more frequently.
You can only save 1 programme
at a time. A new setting cancels
the previous one.
How to save a programme
1. Set the programme that you want to
save. You can also set applicable op-
tions together with the programme. It
is not possible to save the option De-
lay.
2. Press and hold MyFavourite until the
programme bar flashes quickly.
How to set the MyFavourite
programme
1. Press MyFavourite. The indicators
that are related to the MyFavourite
programme and options come on
• The display shows the duration of
the programme.
5.2 TimeSaver
This option increases the pressure and
the temperature of the water. The wash-
ing and drying phases are shorter. The to-
tal programme duration decreases by ap-
proximately 50%.
The washing results are the same as with
the normal programme duration. The dry-
ing results can decrease.
How to activate the TimeSaver option
1. Press TimeSaver. The related indica-
tor and the programme bar come on.
In the display you can see the update
of the programme duration.
• If the option is not applicable to the
programme, the related indicator
flashes quickly 3 times and then
goes off. The programme bar does
not come on.
5.3 Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
How to activate the Multitab option
1. Press Option until the Multitab indica-
tor comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Set the water softener to the highest
level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse
aid.
5.4 Hygiene
With this option you have better hygiene
results. During the rinsing phase, the tem-
perature stays at 70 °C for at least 10 mi-
nutes.
ENGLISH
27
Werbung
