Westfalia 91 41 27 Bedienungsanleitung Seite 5

3. If the sponge cannot be evenly
pressed by the press rolls because
both sides of the sponge protrude
outwards, press down the sponge
through the press roll and make
sure the sponge lies uniformly (see
picture).
4. Hold the wonder wipe over the
bucket and push down the lever
several times depending on how
much moisture you need for clean-
ing the floor.
Replacing the Sponge
To replace the sponge of the wonder
wipe, unscrew the four screws of the
sponge holder. The article no. for the
replacement sponge is 91 41 35.
Cleaning
Rinse out the wonder wipe with flush water and wring out the
sponge. Do not use aggressive cleaning agents or chemicals.
Preferably hang up the wonder wipe while storing.
Design protected by copyright © Westfalia 08/11