Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BASIC EDITING (CUT EDITING)
One player and one recorder are used for cut editing.
Refer to page 17 "PREPARATION".
Preparation
a
Select Edit mode
Enter edit points
Correct edit points if necessary
Execute an edit
Next edit
-—
To perform assemble editing, press the ASSEM
button. Its
indicator will light when ON. Once editing has started, the
button is disabled. In the Assemble
Edit mode, all signals
(AUD-1, AUD-2, VIDEO, Time code) are recorded.
Assemble Editing
|
For insert editing
Insert Editing
To perform insert editing, select the signal(s) to be inserted
(VIDEO/AUD-1/AUD-2) by pressing the corresponding INSERT
buttons. The buttons' indicators light when ON. To insert time
code signals, press the SHIFT button and TC button (to the
right of the AUD-2
button) simultaneously.
During
insert
editing, any signals can be set to ON or OFF whenever
necessary.
-21-
Werbung
