Klarstein BAROSSA 77D Montageanleitung Seite 25

DISPLAY AND BUTTON FUNCTIONS
ON/OFF the power button
1
Press the button 3 seconds to power off. Window digital countdown displays 3,
2, 1. Press again, the power turns on.
Upper zone temperature setting up button
Press one time, window (4) the set value will increase 1 degree Celsius in
2
the original setting temperature, the setting range according to customer
requirements.
Upper zone temperature setting down button
Press one time, window (4) the set value will reduce 1 degree Celsius in
3
the original setting temperature, the setting range according to customer
requirements.
Window
4
Display upper zone temperature.
Window
5
Display lower zone temperature.
Lower zone temperature setting up button
Press one time, window (4) the set value will increase 1 degree Celsius in
6
the original setting temperature, the setting range according to customer
requirements.
Lower zone temperature setting down button
Press one time, window (4) the set value will reduce 1 degree Celsius in
7
the original setting temperature, the setting range according to customer
requirements.
Lamp button
8
Press the button and the lamp turns on, the lamp will turn off once press again.
Set the conversion degrees Celsius / Fahrenheit display, each press this button,
the display
8
window will be into degrees Celsius or Fahrenheit
EN
25