Siemens MOBIC T8 Erste Schritte Seite 41

Data Exchange
Establishing a Serial Connection
To establish a serial connection, connect your MOBIC
(RS–232 port) via a serial cable to the COM port of your
host computer and follow the instructions
on the screen.
To exchange data between your host computer and your MOBIC, you require Microsoft ActiveSync.
Microsoft ActiveSync
is on your MOBIC CD. To install the program, follow the steps below:
1. Insert the MOBIC CD in the CD-ROM drive of the
host computer.
2. Start the Setup.exe in the \ActiveSync folder
of the MOBIC CD.
3. Follow the instructions displayed on your host computer.
The MOBIC has now been detected and you can establish the partnership.
1. You can now continue to follow the instructions of the installation routine on the host computer.
2. Follow the instructions on the screen until the installation is completed.
Once ActiveSync has been successfully installed, the ActiveSync help system is available to you on your host computer.
Getting Started
A5E00263242
All manuals and user guides at all-guides.com
Connection icon (Status: Connection active)
17