Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The sporty bump cap can be used everywhere if there is danger of
bumping the head against hard objects. The bump cap serves as a head
protection against the effect of striking the head against hard, stationary
objects. The wide peak serves as sight protection and protects the head
from scalp lacerations and other superficial injuries when bumping the
head against objects.
The harness is made of 100 % cotton. The shock-resistant shell is made
of high density plastic and serves as protection against bumps. The cap
has a very comfortable fit due to the foamed shell, the ventilation holes in
the harness and shell and the hook and loop fastener.
The bump cap is suitable for a head size of 54 – 59 cm. With the hook and
loop fastener the cap can be adjusted to the head size accordingly.
The bump cap conforms to the Personal Protective Equipment (PPE)
according to EN 812. The bump cap is not an industrial safety helmet
according to DIN 397!
Safety Notes
▪ Do not leave packaging material such as plastic bags lying
around. They may become a deadly toy for small children.
▪ WARNING! The bump cap is not an industrial safety helmet. This
bump cap does not provide protection against the effects of fall-
ing or thrown objects, or moving suspended loads. It should not
be used instead of an industrial safety helmet if an industrial safe-
ty helmet is required.
▪ The bump cap is designed for your personal safety. The cap
must be worn during the whole duration of exposure to any po-
Original Instructions
Bump Cap with LED
Article No. 94 05 15
5
Werbung
