EINHELL 34.019.40 Originalbetriebsanleitung Seite 19

Anleitung_BG_BC_25_S_SPK7:_
Important.
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety information with due care. Keep these
operating instructions in a safe place so that the
information is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and the safety information as
well. We cannot accept any liability for damage or
accidents which arise due to a failure to follow these
instructions and the safety information.
1. Safety information
Please refer to the booklet included in delivery for the
safety information.
CAUTION
Read all the safety regulations and instructions.
Any errors made in following the safety information
and instructions set out below may result in an
electric shock, fire and/or serious injury.
Keep all safety information and instructions in a
safe place for future use.
Safety devices
When working with the equipment, the appropriate
plastic guard hood for cutting blade mode or cutting
line mode must be fitted to prevent objects being
thrown out by the equipment. The integrated blade in
the cutting line guard hood automatically cuts the line
to the optimum length.
2. Layout (Fig. 1/2)
1. Connecting piece for long handle
2. Long handle
3. Steady grip
4. Starter cable
5. Choke lever
6. Petrol tank
7. Fuel pump "primer"
8. Air filter housing cover
9. ON/OFF switch
10. Lock
11. Throttle lever
12. Throttle lock
13. Line spool with cutting line
14a.Cutting line guard hood
14b.Cutting blade guard hood
15. Carrying strap
16. Cutting blade
19.07.2010 8:35 Uhr Seite 19
17. Key for changing the spool
18. Nut for guard hood (3x)
19. Screw for guard hood (3x)
20. Safety split pin
21. Handle screw
22. Connecting screw
23. Spacer sleeve
24. Spacer bush
25. Fastening ring
26. Carrier plate
27. Nut
28. Oil/petrol mixing bottle
29. Spark plug wrench
30. Allen key
31. Locking pin
3. Items supplied
Open the packaging and take out the equipment
with care.
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
Inspect the equipment and accessories for
transport damage.
If possible, please keep the packaging until the
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts.
There is a danger of swallowing or suffocating!
Petrol power scythe
Line spool with cutting line
Cutting blade
Guard hood (2 parts)
Carrying strap
Oil/petrol mixing bottle
Spark plug wrench
Screw for cutting hood (3x)
Nut for cutting hood (3x)
Split pin
Allen key
Locking pin
Key for changing the spool
Nut
Carrier plate
Fastening ring
Spacer bush
Handle screw
Original operating instructions
Safety information
GB
19