Kenwood P-66 Bedienungsanleitung Seite 7

Operating instructions
@ Automatic play
Turn the power on and set a record on the
turntable platter.
2 Select 33 or 45.
rd te 330 045
SPEED
when 33 is selected
@ Each time the key is pressed, the indicator lamp will
change between 33 and 45.
Confirm that the cueing lever is "z "
(DOWN).
Press the PLAY/CUT key.
PLAY/CUT
@ Play starts at the beginning of the record.
Control the volume by the VOLUME control
on the amplifier.
@ Ai the end of play, the tonearm will automatically return
to the arm rest. Simultaneously, the platter will stop turn-
ing.
HiTo stop playback
@ The tonearm returns to the arm rest.
Notes:
A If the size of the record is other than 30 cm (12 inches) or 17
cm (7 inches), as with off-size disks or phono sheets, play will
not start from the correct position by simply pressing the
key. In this case, manually place the tonearm on
the correct starting position. in addition, the auto-return action
may not always work with such records. In this case, press the
PLAY/CUT| key to return the tonearm to the tonearm rest.
. Playback cannot be started from within 63 mm of the record
center.
. Do not stop or hold the rotating turntable by hand.
P-66 (En) 9
m
zZ
q)
c
7)
x=