Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WALL MOUNTING
In order to prevent injuries,the sound base device
must be securely fasten to the wall in accordance
with the below installation instructions.
Caution:
The ground must be firm and capable of han-
7
dling the load.
Use mountings that are appropriate for the
7
weight of the device.
For wooden or hollow wall structures use suit-
7
able plugs and screws. Seek advice from a
specialist dealer.
Warning:
In order to prevent injuries, the device must
7
be securely fastened to the wall in accord-
ance with the installation instructions.
Note:
Installation of the Soundbar GSB 900 for
7
professional use (e.g. in a bistro) must only
be carried out by an electrically qualified
person, in accordance with the applicable
construction regulations as per VDE 0100.
1
Drill the two holes(about 6mm diameter ) in the
wall and keep the distance between drill holes
of the sound base is 500mm.
50 0mm
2
Insert the two plugs supplied into two
drilled holes and then insert two screws
supplied
into
two
1 7
ENGLISH
-----------------------------------------------------------------------------------------------------
holes
and
tighten.
3
Take care to leave 4 mm between the screw
heads and wall.
4mm
4
Insert
the
wall-mounting
plied into the pedestal of the sound base.
5
Use the bracket screws supplied to insert the
wall-mounting bracket hole and tighten.
bracket
sup-
Werbung
