Sharp ER-1875 Bedienungsanleitung Seite 25

1. Installing the paper roll
= Installing the receipt paper roll
(1) Remove the printer cover.
(2) Place the paper roll in the paper roll loca-
tion, insert its end straight into the paper
chute of the printer and press the receipt
paper feed key.
= Installing the journal paper roll
(1) Set the paper roll following the same
paper feed key.
(2) Insert the paper end that has come out at
the printing area of the printer, into the
slit in the paper take-up spool, wind it two
or three turns around the spool shaft and
install the spool on the bearing.
2. Removing the paper roll
= Removing the receipt paper roll
Remove the printer cover.
Push in the paper roll release lever in the
direction of the arrow and pull out the
paper.
Paper roll
release lever
23