Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DETAILED CHANNEL SETTINGS
Searching for digital television
channels through cable
automatically
1
Open the »Input Source« menu with »
2
Select »DTV« using »
confirm with »OK«.
3
Press »MENU« to open the menu.
<
4
Press »
« or »
menu and press »OK« to confirm.
– »CHANNEL« menu is now enabled.
5
Select »Auto Tuning« with »
confirm with »OK«.
– »Tuning Setup« menu will be displayed.
Tuning Setup
Country
Tune Type
Scan type
Scan Type
Network ID
Frequency
Symbol Rate
Back
MENU
6
Go to »Scan Type« with »
select »DVB-C« with »
7
Go to »Country« with »
select the country with »
46 / 56 EN
« or »
« and
V
Λ
>
« to select the »CHANNEL«
« or »
V
Λ
Turkey
DTV
DVB-C
Full
Auto
Auto
Auto
Start
ENTER
« or »
« and
V
Λ
<
>
« or »
«.
« or »
« and
V
Λ
<
>
« or »
«.
----------------------------------------------------
8
Select »Tune Type« with »
select »DTV« with
9
Select »Scan Type« using »
select (»Network Scan« or »Full«) with »
«.
>
or »
«.
– »Network Scan« scanning function sets
the channels according to the cable
operator information in the broadcasting
signal.
– »Full« scan function scans the entire
frequency range selected. With this
search option, search can take a long
time. This search type is recommended.
« and
Some cable providers do not support
»Quick« scan.
Note:
You can speed up the search. To do this,
7
frequency and network ID information are
required. You can obtain such information
from your cable provider or find them in
Internet forums.
10
Press »OK« to start the search.
– The »Channel Tuning« menu will be
displayed and the search for TV channels
will start.
– Search may take several minutes
depending on the number of television
channels received.
Note:
The search can be aborted with »EXIT«.
7
11
Press »EXIT« to end searching.
« or »
« and
V
Λ
<
>
« or »
«.
« or »
« and
V
Λ
Television / User Manual
<
«
Werbung
