Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before first Use
Unpack the cable reel and check the components for damage in transit.
Keep packaging materials and bags out of reach of children. Plastic bags might
become a deadly toy for children.
Using
1. Insert the power plug into a wall
socket. The power indicator (A) turns
on.
2. Slowly pull out the desired length of
the
cord
consumer. You will hear a clicking
sound every half revolution of the
drum. The cord remains in this
position due to the built-in automatic
stop function.
3. To coil up the cord, pull out a little bit
and allow it to retract. The automatic cord retractor retracts the cord until it
stops at the cord guide. To avoid damages to the cable reel, always hold on
the cord while it is retracting.
Completely unroll the cord if you use a consumer load of up to 2000 W. When
using consumers up to 1400 W you do not need to unroll the cord.
4. Connect the plug of the consumer with the socket in the cable reel.
5. In case of the cable reel overheats during use, the built-in, re-settable thermal
protection will switch off the cable reel. The thermal protection protects the
cable reel against inadmissible overheating. Pull the power plug and
disconnect the consumer from the cable reel. Allow the cable reel to cool
down first and then press the push button (B).
All manuals and user guides at all-guides.com
for
connecting
Using
B
the
A
VII
Werbung
